Critical review for the quantification of leachate production: Evaluation example for the “Oum Azza” public landfill in Rabat city,Morocco

The estimation of leachate quantities produced in landfills is necessary to dimension the treatment plants allowing to reduce the polluting load of these effluents and consequently avoid their negative impacts on the environment. Different leachate quantification methods were used in this study to assess the leachate volume produced at the Oum Azza landfill. The water balance method give comparable estimations of leachate production to the Ouled Berjal landfill ratio. The first method showed average values between 487 and 495 m³/day for 2015, 2018, and 2019, and at the same time, the second method gave values between 470 and 477 m³/day for the same years. In contrast, the World Bank ratio showed high values that vary between 2260 and 2295 m³/day for 2015, 2018, and 2019. The on-site data and the statistical analysis showed us that the World Bank ratio is not adapted for the estimation of the leachates produced in Oum Azza landfill, while the water balance and the ratio of Ouled Berjal landfill allowed to give comparable results to reality.     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

山东省主要河流中抗生素污染组成及空间分布特征

采用固相萃取-液相色谱/串联质谱法研究了山东省境内四大流域主要河流中抗生素污染组成及空间分布特征,涉及我国用量最大的6类共20种抗生素。结果表明:20种抗生素均有检出,且大环内酯类、喹诺酮类和四环素类抗生素整体检出浓度较高。就流域而言,半岛诸河流域抗生素污染较小,平均总质量浓度61.4 ng/L;海河流域、小清河流域和淮河流域相对较为严重,平均总质量浓度分别为232、175、118 ng/L。抗生素空间分布呈现一定的规律,检出浓度较高的点位主要集中在人口密集区下游,抗生素污染与周边生活污水、养殖企业废水和城市污水处理厂排水密切相关,而且抗生素组成可从一定程度上反映出污染来源。     

CePO4-TiO2固溶体的NH3-SCR活性

采用共沉淀法合成了不同Ce与Ti摩尔比的CePO₄-TiO₂复合材料,利用XRD、TEM、NH₃-TPD和H₂-TPR技术对其物理化学性质进行了表征,并对其NH₃-SCR活性进行了评价。实验结果表明：随着CePO₄含量的增加,催化剂的活性提高;当Ce与Ti的摩尔比为8:2时催化剂的活性最高,230 ℃的NO转化率达到100%,且具有更广的温度窗口,优于纯CePO₄。表征结果显示,CePO₄与TiO₂形成固溶体后,颗粒尺寸较为均匀,强酸位的数量增多,氧化还原性能提升,从而提高了催化剂的SCR反应活性,同时改善了其抗水抗硫性能。     

平煤十矿底板巷穿层钻孔瓦斯抽采模拟研究

为了降低平煤十矿己15-16-24130工作面运输巷掘进中的突出危险性，基于实际工程背景，考虑瓦斯抽采中的瓦斯运移及煤岩变形等因素，建立了瓦斯抽采气固耦合模型，并利用COMSOL Multiphysics软件对平煤十矿己15-16煤层的底板巷穿层钻孔瓦斯抽采方案进行数值模拟，研究了瓦斯抽采对于降低掘进过程中突出危险性的影响。研究结果表明:在己18煤层开挖底板巷对己15-16煤层进行穿层钻孔瓦斯抽采，瓦斯抽采180 d后，己15-16-24130工作面运输巷附近煤层残余瓦斯压力及瓦斯含量分别降至0.315 MPa和3.84 m3/t；将底板巷穿层钻孔瓦斯抽采方案进行工程应用，实测抽采后的残余瓦斯压力及瓦斯含量在0.32 MPa和3.17 m3/t，均小于平煤十矿煤与瓦斯突出防治规定的“双6”指标（残余瓦斯压力小于0.6 MPa，残余瓦斯含量小于6 m3/t），可有效降低运输巷掘进过程中的突出危险性。     

大力推进城市资源循环利用基地建设——以北京市朝阳区资源循环利用产业基地为例

资源循环利用基地的建设是破解城市固体废弃物“邻避效应”的创新道路,有助于新型城市功能区的建设,是推进资源循环利用的主要方式。以北京市朝阳区资源循环利用产业基地为例,研究其基地建设的优势基础及制约因素,通过探索基地建设模式,分析了基地建设的总体思路和重要举措,以期为其他地区资源循环利用基地建设提供经验。     

北京垃圾分类工作现存问题与对策建议

《北京市生活垃圾管理条例》实施以来,北京垃圾分类工作取得“六升两降”八项成效。基于现阶段北京垃圾分类工作推进情况与存在的痛点、难点问题,提出通过购买第三方服务、借助科技手段与工具、多种渠道多种方式相结合、建立长效监督评价机制等方式,为顺利推进北京垃圾分类工作提供参考。     

核电可持续发展与低中放固体废物安全管理

核事故与放射性废物安全管理是核电可持续发展的两大制约因素。本文针对目前核电厂面临的积存的低中放固体废物超出暂存库设计容量和时间的困境,分析核电持续发展带来的放射性固体废物的处置需求和放射性风险,深入探讨了我国低中放固体废物处置现状和存在的问题,认为问题存在的深层原因主要是废物处置责任划分不明确、核电发展与放射性废物管理的国家职能存在割离,在此基础上提出加快出台放射性固体废物处置选址规划、建立独立的放射性固体废物贮存和处置公司、建立和完善放射性废物管理基金制度等政策建议。     

贵阳城区垃圾站周边地表灰尘重金属水平及季节分异

以贵阳城区垃圾转运站为研究对象,分别于夏季(7月)和冬季(2月)在垃圾站周边采集灰尘样品共26个,研究垃圾转运站地表灰尘重金属水平及冬、夏季节分布规律。结果显示,贵阳市城区垃圾站地表灰尘As、Cd、Cu、Ni、Pb和Zn的几何平均值分别为19.8、0.975、156、43.4、99.1和416mg/kg,与贵州省土壤背景值相比,Cd、Cu和Pb累积较重,As和Ni累积较轻。位于次级街道的垃圾站地表灰尘重金属水平显著高于位于城市主干道的垃圾站,垃圾站周边环境和清洁程度的不同可能是导致地表灰尘重金属空间差异的主要原因。贵阳市城区垃圾站灰尘重金属冬、夏季节分异总体表现不明显,但位于次级街道的垃圾站地表灰尘Cd和Pb含量冬季高于夏季。     

生活垃圾焚烧厂沥滤液处理技术研究进展

生活垃圾焚烧厂沥滤液污染物浓度高,水质成分复杂,是我国污水处理领域的热点和难点之一。重点介绍了生物处理技术、膜技术、物化处理技术、蒸发处理技术及其组合工艺用于垃圾焚烧厂沥滤液处理的研究进展,对现存的问题进行了分析并提出了相应的建议。